Solatube components All Solatube Brighten Up®
Series components have been developed by Solatube for Solatube
resulting in quality components that are fully compatible as well
as robust, low maintenance and easy to install.
Please click on an image
above to learn more about each Solatube component
All Solatube systems are supplied with
everything you need for installation (subject to tube length)
- there are no hidden extras. Every Solatube Daylight System in
the Brighten Up® Series is supplied
as standard with:
Impact-resistant and UV-stabilized
polycarbonate roof dome with Raybender®
3000 Fresnel lens system and LightTracker dome reflector
Solatube roof flashing to match
your roof type (the Solatube system above is shown with a roof
flashing for slate/plain tile)
99.7% reflective Spectralight®
Infinity top tube assembly incorporating adjustable 0-30°
angle adaptor, pre-assembled dome ring and moisture control system
99.7% reflective Spectralight®
Infinity bottom tube assembly incorporating adjustable 0-30°
angle adaptor, pre-assembled ceiling ring with integrated triple
seal and twist locking mechanism
Double-glazed Vusion
diffuser with white ceiling trim
All seals, sealants, fixings
and installation instructions
Please note:
Each angle adaptor tube is 305mm long; together they give an install
distance (roof to ceiling) of up to 400mm (16"). This is generally
sufficient for flat roofs, vaulted ceilings, or very shallow pitch
roofs. For greater install distances you will need to purchase additional
extension tubes to meet your required install distance (please see
our Price
guide for more details).